60" Cut Low-Lift Mower Blade by Lawn Crack (20-1/2" x 5/8" Hole - Hardened Steel)

Buy 6 or More Lawn Crack Mower Blades to Save 10% and Buy 18 or More to Save 20%
$12.95

Lawn Crack's new hardened steel, sharp on all 4 sides, low-lift blade designed to fit most 60-inch commercial lawnmowers.  This blade used to be 2" wide and we sold out.  The feedback we received was great but several people wanted them to be 2.5" wide.  This is the new version just in time for the 2025 season listed March 21, 2025.

This blade is 20.5 inches long with a 0.625 inch (5/8") center hole diameter.  It is 2.5 inches wide and 0.236" thick; made from Hardened Steel.

It can be used right-side-up or upside-down because all cutting edges are sharpened.  Please know when upside-down, the cutting edge is 1/2" lower to the ground than when mounted in the traditional fashion.

Dimensions:

  • Length: 20-1/2"
  • Center hole diameter: 5/8"
  • Width: 2-1/2"
  • Thickness: 1/4" (0.236" Actual)
  • Height Of The Sail (Lift): 11/16"
  • Sharpened Cutting Edge Length: 5-3/4" (Traditional Mount)
    • Sharpened Cutting Edge Length: 2-3/4" (When Flipped)
      • WARNING: When using the blade mounted up-side-down, raise your mower's deck by 1/2" to keep the cut height consistent

The hardened steel will keep the cutting edge sharper longer and will last longer when used in sandy soil conditions. This blade is sharp on all 4 sides. Once you notice your blades are beginning to dull, simply flip the blades over and keep mowing with a fresh cutting edge!

3 blades are required for 60" decks. This blade may also fit some 40" mowers, 2 blades are required for 40" decks.

Please ask us if this blade will fit your mower. It is compatible with most 60" lawn mowers made by Ariens, Bad Boy, Bobcat, Bunton-Goodall, Dixie Chopper, Dixon, Gravely, Exmark (Exmark's that do not use the 15/16" diameter center hole), Gravely, Ferris, Hustler, Husqvarna, Lesco, Scag, Snapper, Snapper Pro, Toro, and Wordlawn.

Same length and center hole diameter as these OEM part numbers:

*If your mower uses any of these part numbers, this blade is compatible with your mower.  Our list is accurate but may not be complete.  Please note our blades only have 1 hole in the center. If your mower requires outside center holes, this blade is not compatible.

  • Ariens 08899100
  • Ariens 08979600
  • Ariens 09081200
  • Ariens 9081200
  • Ariens 3253900
  • Ariens 38946
  • Ariens 20656100
  • Ariens 20656151
  • Bad Boy 038-2007-00
  • Bad Boy 038-6002-00
  • Bad Boy 038-6005-00
  • Bad Boy 038-6050-00
  • Bunton PL7441
  • Dixie Chopper 30227-60
  • Dixie Chopper 30227-60H
  • Dixie Chopper 30227-60V
  • Dixie Chopper A60227-60N
  • Dixon 9383
  • Dixon 12421
  • Dixon 13956
  • Dixon 539129747
  • Dixon 539129775
  • Dixon 539119871
  • Dixon 13922
  • Dixon 539119840
  • Gravely 046999
  • Gravely 46999
  • Gravely 89796
  • Gravely 8979651
  • Gravely 08979600
  • Gravely 8979600
  • Gravely 08979651
  • Gravely 03253900
  • Hustler 793794
  • Hustler 794685 (794685X)
  • Hustler 602771
  • Hustler 794230
  • Hustler 607280
  • Hustler 603992
  • Exmark 103-0301
  • Exmark 103-0301-S
  • Exmark 103-1580-S
  • Exmark 103-2530
  • Exmark 103-2530-B
  • Exmark 103-2530-M
  • Exmark 103-2530-S
  • Exmark 1-633483
  • Exmark 613112
  • Exmark 613250
  • Exmark 633483
  • Toro 105-7718
  • Toro 105-7718-03
  • Toro 105-7777-03
  • Toro 108-1114
  • Toro 108-1123
  • Toro 110-0405
  • Toro 133-2127
  • Toro 115-9649-03
  • Worldlawn 6001004
View details