Determining the right chainsaw chain size can be confusing for anyone who does not use chainsaws on a regular basis. If you are not a chainsaw expert and need to replace your chainsaw chain, this how-to guide should tell you everything you need to know to ensure the replacement chainsaw chain you purchase will fit and work with your chainsaw.
We sell bulk chainsaw chain and chainsaw chains ready to fit the most common chainsaw bar sizes such as 14", 16", 18", 20", and 22".
3 Measurements To Buy The Right Chain For Your Saw
The 3 things you need to know about the chain your chainsaw accepts is the pitch, gauge, and number of drive links.
Let's learn what each of these chainsaw chain characteristics are.
Chainsaw Chain Size Formula
(Pitch + Gauge) + Number of Drive Links = Chainsaw Chain Size/Length
Chainsaw Chain Pitch
The pitch of a chainsaw chain refers to the distance between the drive lugs. Drive lugs are also called drive links. An easy reference for measuring pitch is every 3 rivets. Divide the distance between 3 rivets by 2 to get the pitch.
Pitch determines if the chain will fit the chainsaw's sprocket.
Most chains saws use 0.325", 3/8", or 0.404" pitch, with 1/4" being a less common size that is also used on some saws. 1/2" pitch can be found on some older saws.
Most consumer chainsaws use low profile chains which is a special version of a 3/8" pitch. Stihl and other brands refer to low profile as Picco.
Chainsaw Chain Gauge
The gauge of a chainsaw chain is the thickness, or width, of the drive lugs.
Most chainsaws use 0.050" (1.3 mm) and 0.058" (1.5 mm) gauge chains. 0.043" (1.1 mm) and 0.063" (1.6mm) gauge chains are less common.
Number of Chainsaw Chain Drive Links
The number of drive links can be determined by counting the drive links on the chain you are replacing.
Can Your Chainsaw Chain Be Sharpened?
Chainsaw chains can be sharpened. It is important to sharpen your chainsaw chain correctly to ensure it does not fail during use and cuts effectively after sharpening.
The image above depicts the shapes throughout the life cycle of a chainsaw cutting tooth. It is important to remove all of the material as shown while sharpening. A common mistake is to solely sharpen the very top of the cutter.
Stihl Chainsaw Chain Replacement Guide
If you are replacing a Stihl® chainsaw chain, you can reference the numbers on the side of the chain. These numbers determine the pitch, gauge, and other characteristics of the chain. Stihl® refers to these numbers as their Marketing Number System.
Stihl® Marketing Number System Example:
33RS3 - Your Stihl® chain has the number 33RS3 stamped in the side of it.
Pitch
Distance between three rivets divided by 2 as shown.
1 = 1/4"
2 = .325"
3 = 3/8"
4 = .404"
5 = Stihl Picco (3/8" Extended)
6 = Stihl Picco (1/4" Extended)
Gauge
Marked on the drive link as shown.
1 = .043" (1.1 mm)
3 = .050" (1.3 mm)
5 = .058" (1.5 mm)
6 = .063" (1.6 mm)
0 = .080" (2.0 mm)
(0 = Harvester chain only)
Cutter Type
P = Stihl Picco
R = Stihl Rapid
Cutter Shape
D = Duro (Carbide Tip)
DS = Duro Special (Carbide Tip)
M = Micro (Semi Chisel)
R = Rescue (RDR chain, especially designed for MS 461 R and MS 462 R C-M "Rescue" chainsaws)
S = Super (Full Chisel)
Special
1 = Triple-Humped Tie Strap on PM chain
2 = Triple-Humped Tie Strap on RM chain
3 = Single-Humped Drive Link
F = Full Skip
H = Semi Skip (Half-Skip) or Harvester (i.e. on .404" RMH)
L = Square Ground Chisel
M = Mini
MM = Micro Mini
N = Narrow (PMN)
S = Special
Number of Drive Links in Reels (Stihl Specific)
Pitch | Drive Links in 100' Reel |
1/4" | 2400 |
3/8" Stihl Picco | 1640 |
.325" | 1840 |
3/8" | 1640 |
.404" | 1480 |
Chainsaw Bar and Chain Size Chart
Chains, bars, and sprockets can easily be replaced by the chainsaw's owner, dealer, or small engine repair shop. Please consider the size of chain on the saw now may not be the size chain that was on the saw when it was manufactured.
This chart can help you find a chain for your saw, but you should determine the size of your existing chain and the number of drive links before making a purchase. The information provided in this chart is believed to be true but we request you to verify the size requirement of your saw before making a purchase.
Black and Decker | Notes | Bar Length | Chain Size | # of Drive Links |
DN400, DN401, DN402, DN404, DN412, DN416, 8308, 8310, 8312, 8314, GK110, GK320 |
12" 14" 16" |
3/8" Low Profile |
44 49 54 |
|
Dayton | Notes | Bar Length | Chain Size | # of Drive Links |
2Z753, 2Z760, 2Z970, 4Z022, 4Z023, 4Z109, 4Z573, 6Z284, 6Z823 |
|
10" 12" 14" 16" 18" |
3/8" Low Pro, 3/8" .050" |
40 45 52 56 62 |
2Z462, 2Z462A, 2Z561, 2Z971, 4Z251, 4Z251A, 4Z252, 4Z397, 6Z826, 7Z627 |
|
16" 17" 18" 20" 21" 24" |
3/8" .050" |
60 61 66 70 72 81 |
Dolmar/Sachs | Notes | Bar Length | Chain Size | # of Drive Links |
100, 101, 102, 103, 104, 105, 106, 108, 200, 201, 260, 275, 285, 295, Hobby PS340, PS400 |
12" 14" 16" 18" |
3/8" Low Profile |
45 52 56 62 |
|
100, 101, 102, 103, 104, 105, 106, 108, 200, 201, 260, 275, 285, 295, Hobby PS340, PS400 |
16" |
3/8" .050" |
56 |
|
109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120 |
16" 18" 20" |
3/8" .050" |
59 64 69 |
|
109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120 | Chain length for 16" may vary depending on the make of bar. Count drive lugs on the existing chain. |
16" 18" 20" |
3/8" .058" |
59/60 64 69 |
109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120 |
18" 20" |
.325" .058" |
66 72 |
|
Echo | Notes | Bar Length | Chain Size | # of Drive Links |
280E/EG/EVL, 285EVL, 290EVL, 301, 302, 304/VL, 320EVL, 330EVL, 351EVL, 360EVL, CS300EVL, 440EVL/EVLH, 4000, 4500, 4601 |
12" 14" 16" 18" |
3/8" Low Profile |
45 52 57 62 |
|
280E/EG/EVL, 285EVL, 290EVL, 301, 302, 304/VL, 320EVL, 330EVL, 351EVL, 360EVL, CS300EVL, 440EVL/EVLH, 4000, 4500, 4601 |
16" |
3/8" .050" |
57 |
|
CS280, CS290, CS300, CS301, CS302 |
1/4" .050" |
|||
CS280, CS290, CS300, CS301, CS302, CS315, CS330, CS351, CS3000, CS3400, CS3450 | Chain length for 16" may vary depending on the make of bar. Count drive lugs on the existing chain. |
10" 12" 14" 16" |
3/8" Low Profile |
40 45 52 56/57 |
CS400, CS440, CS3900, CS4000, CS4400, CS4500, CS4600, CS5000 |
16" 18" 20" |
.325" .050" |
66 72 78 |
|
CS60, CS451, CS452, CS500, CS501, CS510, CS550, CS601, CS602, CST610, CS650, CS660, CS701, CS702, CS706, CS750, CS6700, CS8000 |
16" 18" 20" 24" |
3/8" .050" |
60 66 70 81 |
|
CS602, CS702 |
.404" |
|||
Homelite | Notes | Bar Length | Chain Size | # of Drive Links |
Bandit, Classic 192, Little Red, LX30, Super 2, Super 2CC, VI Super 2, XEL Electric, XEL-14, XL, XL 2(after 5042001), XL2CC, XL-10, XL-16, 180 Series, 190, 200, 240, 245(before XE339) |
Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
10" 12" 14" 16" |
42 48 53 59 |
|
Bandit, Classic 192, Little Red, LX30, Super 2, Super 2CC, VI Super 2, XEL Electric, XEL-14, XL, XL 2(after 5042001), XL2CC, XL-10, XL-16, 180 Series, 190, 200, 240, 245(before XE339) |
Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
16" 18" 20" |
3/8" .050 |
59/60 64 70 |
EL12, EL14, EL16 |
12" 14" 16" |
3/8" .050" |
45 50 56 |
|
110 (Electric) |
1/4" .050" 3/8" Low Profile |
|||
Big Red, EZ Series, EZ 250(prior to 1989) Mini SL, Super EZAO, V-15 Mini S6, XL 76, XL 100 Series, 130, 150, 290, 340, 350 |
Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
16" 20" |
3/8" .050" |
59 70 |
CS40, CS50, 245, 250, 252, 290, 300 (after 1989) |
Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
16" 18" 20" |
.325" .050" |
67 73 79 |
C Series, Super XL, SXL 922, SXL 923, SXL 925, VI 955, XL 12, XL 15, XL 400, XL(700 Series), XL(800 Series), XL(900 Series), 330, 350, 360, 410, 450, 460, 550, 650 |
Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
16" 18" 20" 24" |
3/8" .050" |
60 66 70 81 |
PS33, 20AV, 23AV, 3300, 3350, 3800, 3850 |
14" 16" 18" |
3/8" .050" |
52 56 62 |
|
25, 27, 4100, 4150, 4500, 4550 |
16" 18" 20" |
.325" .050" |
66 72 78 |
|
Husqvarna | Notes | Bar Length | Chain Size | # of Drive Links |
34, 35, 37, 335 | Some models use 1/4" chain |
14" |
3/8" Low Profile |
50 |
A-65, 65L, A-77, 160, 163, 180S, 263, 280S, 380CD, 480 |
14" 16" |
3/8", .404" |
52 56 |
|
Husky Jr. 121 |
14" 16" |
3/8" Low Profile |
52 57 |
|
16" |
3/8" .050" |
57 |
||
EL 16, 23, 36, 41, 136, 141, 243 | (Models 36, 41, 136, 141 may take G66). |
14" 16" |
3/8" .050" |
52 56 |
32 |
14" 16" |
3/8" .050" |
53 58 |
|
33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 57, 133, 140S, 154, 234, 238, 240, 242, 246, 254, 257, 340, 345, 346, 350, 351, 360, 440, 444, XP Rancher 50, EL1400, 1405 |
16" 18" 20" |
3/8" .050" |
59 64 70 |
|
18" |
3/8" .058" |
64 |
||
16" 18" |
.325" .058" |
64 72 |
||
36, 40, 41, 45, 49, 51, 55, 136, 141, 340, 346, 351 | Use only with narrow-kerf design bar. (Models 36, 41, 136, 141 may take S52/S56). |
16" |
.325" .050" |
66 |
Rancher, SS77, 61, 62, 65, 66, 77, 160, 162, 181, 185, 257, 260, 261, 262, 263, 266, 268, 272, 281, 285, 288, 365, 371, 380, 394, 480, 1100, 2100, 2101XP, 3120XP, 266XP |
16" 18" 20" |
3/8" .050" |
60 68 72 |
|
16" 18" 20" 24" |
3/8" .058" |
60 68 72 84 |
||
20" |
3/8" .063" |
72 |
||
John Deere | Notes | Bar Length | Chain Size | # of Drive Links |
8, 9, 61, 81, 91 | Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
12" 14" 16" |
3/8" Low Profile |
44 49 54 |
12, 15 |
3/8" Low Profile, 3/8 .050 |
|||
17, 19 |
3/8" .050 |
|||
25EV, 28V, 30V, 35EV, 40V | Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
12" 14" 16" |
3/8" Low Profile |
45 52 56/57 |
50AV, 51SV, 55V, 60V, 65, 66SV, 70V, 80EV |
16" 18" 20" 24" |
3/8" .050" |
60 66 70 81 |
|
45EV, 46EV, 450V |
16" 18" 20" |
.325" .050" |
66 72 78 |
|
Jonsered | Notes | Bar Length | Chain Size | # of Drive Links |
36, 361, 365, 370, 2014, 2016, 2036 |
|
12" 14" 16" |
3/8" Low Profile |
45 52 56 |
60, 61, 62, 66, 70, 75, 77, 80, 81, 90, 110, 111, 490, 601, 621, 751, 801, 820, 830, 910, 920, 939, 1020 | Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain. |
16" 18" 20" |
3/8" .050" |
59/60 64 70 |
18" |
3/8" .058" |
64 |
||
16" 18" |
.325" .058" |
66 72 |
||
45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 510, 521, 535, 2050, 2051, 2054 |
|
16" 18" 20" |
.325" .058" |
66 72 78 |
2036, 2040 |
Some models used 3/8" .050 chain |
16" |
.325 .050 |
66 |
2051, 2054, 450, 455, 510SP, 520, 525, 535 |
.325" .050, .325" .058 |
|||
625, 630, 630 Super, 670, 2095 |
3/8" .050, 3/8" .058 |
|||
Makita | Notes | Bar Length | Chain Size | # of Drive Links |
DCS 9000 |
16" 24" |
3/8" .058" |
60 84 |
|
DCS 330S, DCS 340, DCS 341, DCS 390S, DCS 400, DCS 401 |
14" 16" |
3/8" .050" |
52 56 |
|
5012B, 5014NB, 5016NB |
12" 14" 16" |
3/8" .050" |
45 54 58 |
|
DCS 520I, DCS 5200I, DCS 6800I, DCS 9000 |
18" 20" 21" |
3/8" .050" |
64 70 72 |
|
DCS 430, DCS 431 |
16" 18" 20" |
.325" .050" .325" .050" .325" .050" |
66 72 78 |
|
McCulloch | Notes | Bar Length | Chain Size | # of Drive Links |
PRO35, 40, Mini Macs PM 6, PM 12, PM series (155, 310, 320, 330, 340, 355, 360, 364, 370, 374, 375, 384, 470, 474, 480, 484, 494, 510, 515), Eager Beaver, Mini Mac (all Models), Mac 110, 115, 120, 130, 140, 160S, 400, 430, 435, 440, 445, 3200, 3210, 3214, 3216, 3514, 3516, 3518, 3816, 3818AV, McCat Super 6AV, 18AV, Silver Eagle 2010, 2012S, 2014S, 2016S, 2116AVS, 2316, 2318AVS, Titan 35,40, Wildcat/MacCat, Electramac 10ES, 12ES, 14ES, 16ES, 200-12, 250-12, 250-14, 300S-16, 450S-16, Silver Eagle, 250-14, 300S-16 | Chain length may vary. Count drive lugs on existing chain.
Some models use a 1/4" chain. |
10" 12" 14" 16" |
3/8" Low Profile |
38/39 44/45 4950 54/55 |
MAC 4600, 4900 Series |
16" 18" 20" |
.325" .050" |
66 72 78 |
|
Mac (1-10, 2-10, 3-10, 4-10, 5-10, 6-10, 7-10, 10-10), CP55, CP70, CP70L, 10-10A, Pro 10-10A, Pro Mac (55, 60, 555, 570, 605, 610, 650, 655, 700, 800, 805, 850), Super Pro (60, 70, 80, 81,), Double Eagle 50, Double Eagle 80, Eager Beaver 3.4, 3.7, Titan 50, 57, Timber Bear, Silver Eagle 3420, 3720 |
16" 18" 20" 24" |
3/8" .050" |
60 66 70 81 |
|
Olympic / Olem-Mac | Notes | Bar Length | Chain Size | # of Drive Links |
233, 234, 240, 241, 244, 335, 340, OM3200, 140EF, 930, 935, 940, 942, 945, 945, 950, 951 |
12" 14" 16" |
3/8" Low Profile |
44 50 56 |
|
233, 234, 240, 241, 244, 335, 340, OM3200, 140EF, 930, 935, 940, 942, 945, 945, 950, 951 |
16" 18" |
.325" .058" |
66 72 |
|
930, 935, 940, 942, 945, 945, 950, 951 |
16" 18" 20" |
3/8" .050" |
60 64 71 |
|
250/A/AS, 251, Super 251, 252, 254, 260, 261, 272, 280, 284, 355, 460, 461, 480, 481, 482 |
16" 18" 20" 24" |
3/8" .050" |
60 66 70 81 |
|
Partner | Notes | Bar Length | Chain Size | # of Drive Links |
Mini P, Mini PII, Mini PIII, Spartan (330, 350, 1601, 1602, 1610, 1611, 1612, 1613, 1614, 1616) | Some models use a 1/4" chain. |
12" 14" 16" |
3/8" Low Profile |
45 52 56 |
365 |
14" |
3/8" .050" |
52 |
|
F50, F55, P50, P51, P55, P65, P70, P85, P100, R11, R12, R14, R16, R17, R18, R19, R20, R21, 22, R23, R30, R35, 40, R416, R420, R421, R435, R440, S50, S55, S65, 550, 650, 1655, 2055, 7000 |
14" 16" 20" |
3/8" .050" |
60 72 |
|
P360, P400, P450, P500, P5000 |
16" |
.325" .050" |
66 |
|
Pioneer | Notes | Bar Length | Chain Size | # of Drive Links |
P10, P11, P12 | Chain length may vary. Count drive lugs on the existing chain.
Some models use a 1/4" chain |
14" |
3/8" Low Profile |
50 |
P20, P21, P25, P26, P28, P970, P1072, P1073, P1074 |
16" |
.325" .058" |
69 |
|
P11, P20, P25, P285, P970, P1072, P1073 |
16" 20" |
3/8" .050" |
60 72 |
|
P38, P39, P40, P41, P42, P45, P50, P51, P52, P55, P60, P61, P62, 515 Farmsaw, Farmlite |
16" 20" |
3/8" .058" |
60 72 |
|
Poulan | Notes | Bar Length | Chain Size | # of Drive Links |
E14E, E16E, Micro 25 (XX Series, XXV Series), Super Micro 25 (XX Series, XXV Series), Wildthing, S23, S25, 180, 190, 200, 205, 225, 235, 240, 255, 260, 1220, 1420, 1425, 1625, 1800, 1950, 2000, 2050, 2075, 2150, 2175, 2250, 2300, 2350, 2375, 2400, 2450, 2500, 2550, 2600, 2700, 2800, 3000, 3300, 255, 295, EL14 |
10" 12" 14" 16" 18" |
3/8" Low Profile |
40 45 52 56 62 |
|
285, 295, 305, 306SA, 310, 335, 336, 2700, 2750, 2800, 2900, 3000, 3050, 3100, 3300 |
16" 18" 20" |
.325" .050" |
66 72 78 |
|
203, 245, 306, 360, 361, 375, 395, 400, 450, 3400, 3500, 3600, 3700, 3800, 3900, 4000, 4200, 4400, 4900, 5200, 5400, 5500, 6700, 6900, 7700, 8500 |
16" 17" 18" 20" 24" |
3/8" .050" |
60 61 66 70 81 |
|
405, 415, 425, 445, 455, 475, 505 |
16" 20" |
3/8" .050" 3/8" .050" |
60 72 |
|
365, 380, 3350, 3450, 3500, 3600, 3650, 3750 |
20" 22" |
3/8" .050" |
70 76 |
|
Poulan Pro S25, 205, 225, 285, 305, 335 |
12" 14" 16" 18" |
3/8" Low Profile |
45 52 56 62 |
|
Poulan Pro 325 |
16" 18" |
.325" .058" |
66 72 |
|
Poulan Pro 405, 455, 525, 655 |
16" 18" |
3/8" .050" |
60 72 |
|
Red Max | Notes | Bar Length | Chain Size | # of Drive Links |
G300 |
12" 14" 16" |
3/8" Low Profile |
45 52 56 |
|
Remington | Notes | Bar Length | Chain Size | # of Drive Links |
Job Master, Mighty Mite (100-500, Weekender), Yardmaster, Jobmaster, Sportsman, Outdoorsman, Outdoorsman II, Rancher, 812, 814, 816, 840, 850, 860 | Chain length may vary depending on the make of the bar. Count drive lugs on the existing chain.
Models with chain brakes use a 3/8" low profile chain. |
10" 12" 14" 16" |
3/8" .050 |
40 45 49/50 56 |
Electric EL-1, EL-6, EL-7, Limb ‘N’ Trim, 8-14, 75475, 75481, 75762, 76728, 098031, 99178, 100015, 100089-05 |
10" 12" 14" 15" 16" |
3/8" .050" |
40 45 50 53 56 |
|
Logger, PL-4, PL-5, PL-5A, PL-55, PL-55A SL-4 Automatic, SL-9, SL-9 Automatic, SL-10, SL-11A, SL-14, SL-16, Woodsman |
16" 18" 20" 21" 24" |
3/8" .050" |
60 66 70 72 81 |
|
Pole Saw #104317 |
8" |
3/8" .043" |
34 |
|
Sears / Craftsman | Notes | Bar Length | Chain Size | # of Drive Links |
35201 |
360 model number prefix |
20" |
.325" .050" |
78 |
3412, 3425, 3455, 3476, 34101, 34102, 34106, 34109, 34111, 34114, 34124, 34181, 35006, 35008, 35018, 35093, 35104, 35106, 35108, 35114, 35116, 35118, 35119, 35120, 35134, 35136, 35138, 35144, 35156, 35158, 35198, 35201, 35202, 35203, 35205, 35206, 35207, 35216, 35231, 35235, 35263, 35266, 35267, 35363, 35366, 35367, 35504, 35505, 35506, 35508, 35512, 35514, 35516, 35624, 35718, 35723, 35736, 35802 | 358 model number prefix |
10" 12" 14" 16" 18" |
3/8" Low Profile |
40 45 52 56 62 |
35094, 35211 | 358 model number prefix
Chain length for 14" may vary depending on the make of bar. Count drive lugs on the existing chain. |
14" |
3/8" Low Profile |
52/53 |
35232, 35238, 35886 | 358 model number prefix
Chain length for 14" may vary depending on the make of bar. Count drive lugs on the existing chain. |
16" |
3/8" Low Profile |
56/57 |
35119, 35607, 35624.2, 35628 | 358 model number prefix |
18" |
.325" .050" |
72 |
35238, 35618, 35623 | 358 model number prefix |
18" |
3/8" Low Profile |
62 |
35212, 35483, 35608, 35609, 35690, 35885, 35887, 35889 | 358 model number prefix |
16" 18" 20" 24" |
3/8" .050" |
59 66 70 81 |
35120, 35492, 35633 | 358 model number prefix |
20" |
.325" .050" |
78 |
3400, 3401, 3402, 3445, 3455 | 315 model number prefix |
10" 12" 14" 16" |
3/8" Low Profile |
40 45 52 56 |
3411, 3460, 3461, 34071 | 315 model number prefix |
12" 14" |
3/8" Low Profile |
48 52 |
3408, 3465, 3466, 3417* |
315 model number prefix *Caution: The self-sharpening unit must be removed from the 3417 saw or serious injury could result. |
14" |
3/8" Low Profile |
53 |
35251, 35255 | 917 model number prefix |
14" 16" |
3/8" Low Profile |
53 57 |
35138, 35147, 35148, 35177, 35178, 35187, 35197, 35371, 35375 |
917 model number prefix Caution: The self-sharpening unit must be removed from the saw or serious injury could result. |
17" |
.325" .050" |
71 |
35372, 35376 |
917 model number prefix Caution: The self-sharpening unit must be removed from the saw or serious injury could result. |
18" |
.325" .050" |
74 |
35373, 35377 |
917 model number prefix Caution: The self-sharpening unit must be removed from the saw or serious injury could result. |
18" |
.325" .050" |
74 |
Shindaiwa | Notes | Bar Length | Chain Size | # of Drive Links |
90, 100, 101, 102, 103, 104, 105, 107, 110, 113, 117, 120, 140, 150, 160, 180, 300, 305, 340, 345, 346 350, 355, 360, 415, 416, 420, 440, 450, 451, 480, 500, 510, 560 | Chain length may vary Count drive lugs on the existing chain. |
10" 12" 14" 16" 18" |
3/8" Low Profile |
40 45 52/53 56/57/58 62 |
16" |
3/8" .050" |
56 |
||
16" |
.325 .050" |
59 |
||
575, 580, 680, 685, 695, 757 |
16" 18" 20" |
3/8" .050" |
60 68 72 |
|
575, 580, 680, 685, 695, 757 |
16" 18" 20" 24" |
3/8" .058" |
60 68 72 84 |
|
575, 580, 680, 685, 695, 757 |
20" |
3/8" .063" |
72 |
|
377, 405, 406, 407, 410, 415, 416, 440, 450, 451, 480, 485, 488, 500 |
16" 18" 20" |
.325" .050" |
66 72 78 |
|
Skil | Notes | Bar Length | Chain Size | # of Drive Links |
1601, 1602, 1610 (Types 1, 2 & 3), 1611 (Type 1), 1612, 1613, 1614 (Types 1 & 2), 1616 (Types 1, 2 & 3), 1700, 1705 (Types 1, 2 &3) |
Chain length may vary Count drive lugs on the existing chain.
Some models use a 1/4" chain. |
10" 12" 14" 16" |
3/8" Low Profile |
40 45 52 56 |
1620, 1622, 1624, 1634, 1636 |
Chain length may vary. Count drive lugs on the existing chain. |
10" 12" 14" 16" |
3/8" Low Profile |
40 45 52 57 |
605, 606 Electric |
Chain length may vary. Count drive lugs on the existing chain. |
14" 16" |
3/8" Low Profile |
52 58 |
1641 |
Chain length may vary. Count drive lugs on the existing chain. |
16" 18" 20" 24" |
3/8" .050" |
60 66 70 81 |
Solo | Notes | Bar Length | Chain Size | # of Drive Links |
600, 603, 605, 606, 631, 632, 638, 662, 670, 680, 690 |
14" 16" |
3/8" Low Profile |
53 58 |
|
634, 639, 641, 644, 645, 647, 651, 654 |
16" 18" 20" |
.325" .050" |
67 73 79 |
|
Stihl | Notes | Bar Length | Chain Size | # of Drive Links |
E10, E14, 009, 010, 011, 012, 015, 018, 019, 020, 020T, 021, 023, 023C | Some Stihl models may come equipped with 3/8"-.043" gauge chain (Low Profile Narrow).
Some models may use a 1/4" chain. |
12" 14" 16" 18" |
3/8" Low Profile |
44 50 55 61 |
017, 019T, 021, 023L, HT75, E140 |
12" 14" 16" |
3/8" Low Profile Narrow (.043) |
44 50 55 |
|
023, 025 |
16" 18" |
.325" .063" |
62 68 |
|
026, 026 Pro, 029 |
16" 18" 20" |
.325" .063" |
67 74 81 |
|
024, 026, 028, 029, 030, 031, 032, 034, 036, 036 Pro, 036QS, 038, 039, 040, 041, 042, 044, 045, 048, 056, 064, 066, E15, E20 |
16" 18" 20" 24" 28" |
3/8" .050 |
60 66 72 84 91 |
|
044 Pro, 046M |
18" 20" 25" 28" |
3/8" .050 |
66 72 84 91 |
|
044 Pro, 046M |
18" 20" 25" 30" |
3/8" .063 |
66 72 85 97 |
|
066M |
20" 25" 28" 32" 36" |
3/8" .050 |
72 85 92 106 115 |
|
066M |
20" 25" 30" 36" |
3/8" .063 |
72 85 97 115 |
|
088M |
21" |
3/8" .063 |
72 |
|
088M |
25" 30" 33" 36" 41" 47" |
.404 .063 |
80 91 99 108 123 138 |
|
TAS / Tanaka | Notes | Bar Length | Chain Size | # of Drive Links |
ECS290, ECS300, ECS320, ECS330, ECS650, ECS355, ECS405, ECS3500, ECS360, ECS370 |
12" 14" 16" 18" |
3/8" Low Profile |
45 52 57 62 |
|
16" |
3/8" .050 |
56 |
||
16" |
.325 .050 |
59 |
||
Toro | Notes | Bar Length | Chain Size | # of Drive Links |
51100, 51140 |
10" 12" 14" |
3/8" Low Profile |
40 45 52 |
|
Wen | Notes | Bar Length | Chain Size | # of Drive Links |
1100(Type 1), 1200(Type 1), 1400(Type 1) |
10" 12" 14" |
3/8" Low Profile |
41 49 54 |
|
Bumble Bee, Hornet, Wasp, 1100, 1200, 1400, 2000, 2400, 2600, 2700, 5000, 5008, 5010, 5014, 5016 |
10" 12" 14" 16" |
3/8" Low Profile |
41 49 53 58 |
|
Lumberjack, 6014, 6016 |
14" 16" |
3/8" Low Profile |
49 55 |
|
Western Auto | Notes | Bar Length | Chain Size | # of Drive Links |
AV14 (Electric), AV16 (Electric), CAT 17 (Electric), WIZ: 010, 012, 014, 110, 112, 212, 214, 316, 525 DA, 1800, 2000 |
10" 12" 14" 16" |
3/8" Low Profile |
40 45 52 57 |
|
B013, WIZARD AV18, 430, 3400 |
16" 18" 20" |
3/8" .050" |
60 66 70 |