61" Cut Low-Lift Mower Blade (21" Long x 5/8" Hole) Hardened Steel
Lawn Crack's new hardened steel, sharp on all 4 sides, low-lift blade designed to fit most 61-inch commercial lawnmowers. This blade used to be 2" wide and we sold out. The feedback we received was great but several people wanted them to be 2.5" wide. This is the new version listed on March 30, 2025.
This blade is 21 inches long with a 0.625 inch (5/8") center hole diameter.
This blade is 21 inches long with a 0.625 inch (5/8") center hole diameter. It is 2.5 inches wide and 0.236" thick; made from Hardened Steel.
It can be used right-side-up or upside-down because all cutting edges are sharpened. Please know when upside-down, the cutting edge is 1/2" lower to the ground than when mounted in the traditional fashion.
Dimensions:
- Length: 21"
- Center hole diameter: 5/8"
- Width: 2-1/2"
- Thickness: 1/4"
The hardened steel will keep the cutting edge sharper longer and will last longer when used in sandy soil conditions. This blade is sharp on all 4 sides. Once you notice your blades are beginning to dull, simply flip the blades over and keep mowing with a fresh cutting edge!
3 blades are required for 61" decks. 2 blades are required for 42" decks.
Please ask us if this blade will fit your mower. It is compatible with most 42" and 61" lawn mowers made by Ariens, Bad Boy, Bobcat, Bunton-Goodall, Ferris, Gravely, Great Dane, Husqvarna, Hustler, Lesco, Scag, Snapper, Spartan, Windsor, & Wright.
Same length and center hole diameter as these OEM part numbers:
*If your mower uses any of these part numbers, this blade is compatible with your mower. Our list is accurate but may not be complete. Please note our blades only have 1 hole in the center. If your mower requires outside center holes, this blade is not compatible.
- Ariens: 05290000
- Bad Boy: 038-6080-00
- Bad Boy: 038-6085-00
- Bad Boy: 5208425
- Bob-Cat: 112111-03
- Bob-Cat: 112243-03
- Bob-Cat: 48111
- Bob-Cat: 48307
- Bob-Cat: 42180B
- Cub Cadet: 15208425
- Bunton: PC005
- Ferris: A48304
- Ferris: 20842
- Ferris: 20842S
- Ferris: 481712
- Ferris: 15208425
- Ferris: 5208425
- Ferris: 5020842
- Ferris: 1520842
- Ferris: 5020842S
- Ferris: 5101755
- Ferris: 5101755S
- Ferris: 5101755Ssm
- Gravely: GDU10232
- Gravely: 05290000
- Great Dane: C39949
- Great Dane: D18036
- Great Dane: Gdu10232
- Husqvarna: 539101733
- Husqvarna: 539105711
- Hustler: 782516
- Hustler: 795252
- Lastec: P128
- Lastec: P246
- Lastec: P322
- Lesco: 050170
- Lesco: 50170
- Scag: 481712
- Scag: 482879
- Scag: 48111
- Scag: A48111
- Scag: 481708
- Scag: 481159
- Scag: 482001
- Scag: 482787
- Scag: 482237
- Scag: 482693
- Scag: 483318
- Scag: 482963
- Scag: 482881
- Snapper Pro: 5101755
- Snapper Pro: 5101755BMYP
- Spartan: 438-0002-00
- Wright: 71440010
- Wright: 71440006
- Wright: 71490003
- Wright: 71440003
