Ferris Spindle Assembly 5416763FS For Some 48" 400S & Snapper Pro S 40 Models

Replacement spindle assembly for Ferris and Snapper Pro part numbers 5416763 which has been superseded to 5416763FS.

This spindle fits specific 48-inch cut Ferris 400S & 500S & Snapper Pro S 40 zero-turn models.

The 6 mounting holes are not threaded per the OEM design.  For proper installation, torque spindle mounting bolts to 25-30 ft-lbs (34-41 Nm).  The part number for the mounting bolts is 704146 (SCREW, HEX, 5/16-18X1).  Using the correct mounting bolt will cut the treads as you install them to secure the spindle.  The diagram for the mowers using this spindle do not show washers or a nut.

Verified Replacement For These Mower Models:

Ferris:

• 400S (5901704) - Ferris 400S Series 48" Zero-Turn Mower, 23hp Briggs & Stratton
• 400S (5901705) - Ferris 400S Series 48" Zero-Turn Mower, 22hp Kawasaki
• 400S (5901706) - Ferris 400S Series 48" Zero-Turn Mower, 23hp Briggs & Stratton
• 400S (5901707) - Ferris 400S Series 48" Zero-Turn Mower, 22hp Kawasaki, CARB
• 400S (5901729) - Ferris 400S Series 48" Zero-Turn Mower, 23hp Briggs & Stratton
• 400S (5901740) - Ferris 400S Series 48" Zero-Turn Mower, 23hp Briggs & Stratton
• 400S (5901775) - Ferris 400S Series 48" Zero-Turn Mower, 25hp Briggs & Stratton
• 400S (5901813) - Ferris 400S Series 48" Zero-Turn Mower, 25hp Briggs & Stratton, CARB
• 400S (5901952) - Ferris 400S Series 48" Zero-Turn Mower, 23hp Briggs & Stratton
• 400S (5901990) - Ferris 400S Series 48" Zero-Turn Mower, 23hp Briggs & Stratton

Snapper Pro:

• S 40 (5901738) - Snapper Pro S40 Series 48" Zero-Turn Mower, 22hp Kawasaki
• S 40 (5901739) - Snapper Pro S40 Series 48" Zero-Turn Mower, 23hp Briggs & Stratton

For use with blades that have a 13/16" (0.805") center hole diameter.

If you have a question about this spindle, please contact us and mention SKU Ferris1.