Plow For Most 24-Inch Wide Snow Blowers

$347.95

Turn your 24-inch wide 2-stage or 3-stage snowblower into a snow plow! Fits most snow blowers, see below for more info or for plows for wider snow blowers. 


Compatible with 2-stage or 3-stage 24-inch wide Ariens, Cub Cadet, Husqvarna, John Deere, MTD/Craftsman, and Snapper snow blowers. Compatible with Honda models but does not fit Honda model HSM1336I.


Slush Plow Attachment For 24-Inch Wide Snow Blowers


Will this fit my snow blower? Let's find out!


Requirements for this plow to fit your snow blower:


  • Your snow blower must be a 24-inch model (This plow is 30 inches wide - the plow must be wider than your snow blower is wide)
  • Your snow blower must have a transmission (2-stage and 3-stage snow blowers have transmissions)
  • Your snow blower must not be Honda model HSM1336I (See below for compatible Honda snow blower models)
  • Compatible snow blower brands include MTD, Cub Cadet, Sears, Troy-Bilt, Yardman, Snapper, Noma, John Deere, Husqvarna, Toro, Simplicity, Ariens, Murray and HSS Honda models only.


This plow will not work with:



  • Single-stage snow blowers
  • Snow blowers wider than 24-inches (See our plows for larger snow blowers listed below)
  • Honda model HSM1336I


What's included?



  • 30-inch wide plow designed for 24-inch wide snow blowers (Grey special-blend hard, durable plastic - 1/4" thick)
  • Metal brackets to attach to your snow blower (1/4" thick)
  • Rubber scraper strip (3/8" thick)
  • Plastic backing plate for rubber scraper strip (1/4" thick)
  • Rubber spacers
  • All hardware needed to install
  • Paper template to make drilling holes in the proper location
  • Instructions


How long and what is needed to assemble and install the plow?


The average decently mechanically inclined person can assemble and install the plow in 15-30 minutes. The plow can be removed and reinstalled in minutes after the initial assembly and installation. The plow can also be easily adjusted as needed after installation without tools using the treaded knobs including angling the plow if desired.


The only tools needed are a 1/2 inch wrench, a 1/2 inch deep well socket (or a 2nd 1/2 inch wrench), a drill, and a 5/16" drill bit. All of the hardware needed to install is included and the contents include a paper template to make marking the hole locations on your snow blower quick and easy.


Additional Information:


This plow is 30-inches wide because your plow needs to be wider than your snow blower.


Honda snow blower plow fitment by model - Compatible with HSS928AW, HSS928AWD, HSS1332AT, HSS1332ATD, HSS724AT, HSS724ATD, HSS724AW, HSS724AWD, HSS928AT, HSS928ATD, and HSS1336iAS. Does not fit Honda model HSM1336I.



Have a question about this product? Email us for assistance and tell us you are looking at SKU 16226.  

Ver información